Bolt Peg Install
Step 1.
-
Remove the 2 (10mm) bolts holding the rubber foot pad on the bottom of the foot pegs. (These bolts can be discarded. They will not be reinstalled)
Step 2.
-
Mount the highway bracket to the bottom of the foot peg using the 2 (10mm Long) bolts that we have included for you
Step 4
Mount Highway Peg Arm
-
Insert the 3/8 button head bolt in to the highway bracket
-
Followed by 2 washers
-
Followed by the highway peg arm
-
Followed by the 2 smaller washers
-
Lock in with 2 lock washers
-
Followed by the 2 acorn nuts
-
Tighten hardware using 5.5 mm Allen and a 5/8 Wrench
Side Note : The arm is reversible. You can install the arm with the arm arch up or the arm arching down
Step 5
Install the Peg
-
Bolt peg to the top of the highway peg arm
Step 6
Adjust Peg as needed
-
Sit on bike add place foot on peg to determine if you need to adjust the peg for comfort
Side Note:You may have to adjust again once you’ve rode the bike around a few times
Thank you for your purchase! If you need any help, please give us a call.